Stimulation of densification during the reduction of U3O8 to UO2 by atmosphere control

A reduction process in the head-end for pyroprocessing has been adopted to avoid oxidation attack on the molybdenum crucible during sintering. The reduction process is employed to reduce U₃O₈ pellets to UO₂ prior to sintering. This allows elimination of the oxygen source, which causes oxidation attack during sintering, thereby permitting the use of a metallic crucible. However, little densification occurs due to the low reduction temperature limited by the INCONEL crucible. Consequently, the amount of material scraps from the pellets increases, thus creating an additional processing burden due to its high radioactivity. To reduce the amount of scraps, densification should be enhanced. This study suggests a simple atmospheric control strategy and clarifies its effects. With the atmospheric control, a higher bulk density and better attrition resistance were obtained in comparison to without this strategy. This can be explained in terms of O/U ratio dependent diffusion kinetics during the reduction of U₃O₈ to UO₂.     

Controlled Secure Direct Communication Protocol via the Three-Qubit Partially Entangled Set of States

In this paper, we first re-examine the previous protocol of controlled quantum secure direct communication of Zhang et al.’s scheme, which was found insecure under two kinds of attacks, fake entangled particles attack and disentanglement attack. Then, by changing the party of the preparation of cluster states and using unitary operations, we present an improved protocol which can avoid these two kinds of attacks. Moreover, the protocol is proposed using the three-qubit partially entangled set of states. It is more efficient by only using three particles rather than four or even more to transmit one bit secret information. Given our using state is much easier to prepare for multiqubit states and our protocol needs less measurement resource, it makes this protocol more convenient from an applied point of view.     

Stream-Based Data Sampling Mechanism for Process Object

Process object is the instance of process. Vertexes and edges are in the graph of process object. There are different types of the object itself and the associations between object. For the large-scale data, there are many changes reflected. Recently, how to find appropriate real-time data for process object becomes a hot research topic. Data sampling is a kind of finding c hanges o f p rocess o bjects. There i s r equirements f or s ampling to be adaptive to underlying distribution of data stream. In this paper, we have proposed a adaptive data sampling mechanism to find a ppropriate d ata t o m odeling. F irst o f all, we use concept drift to make the partition of the life cycle of process object. Then, entity community detection is proposed to find changes. Finally, we propose stream-based real-time optimization of data sampling. Contributions of this paper are concept drift, community detection, and stream-based real-time computing. Experiments show the effectiveness and feasibility of our proposed adaptive data sampling mechanism for process object.     

Nano-to-macroporous TiO2 (anatase) by cold sintering process

Cold Sintering Process (CSP) was applied on commercial nanopowders to produce nanostructured TiO₂ anatase with nano-to-macro porosity. Nanoporous TiO₂ based materials were obtained by applying CSP at 150 °C and pressures up to 500 MPa on three TiO₂ nanopowders with different specific surface area (s.s.a. = 50, 90 and 370 m²/g), using water as transient aqueous environment. Although TiO₂ is insoluble in water, a density of 68% and s.s.a. = 117 m²/g were achieved from the powder with the highest specific surface area. A post annealing process at 500 °C increased the density up to 73% with a s.s.a. = 59 m²/g, and the crystallites dimensions passed from 110 Å in the powder to 130 Å in CSP material and 172 Å after post annealing. Finally, macroporosity was produced by using thermoplastic polymer beads as sacrificial templates within TiO₂ nanopowder during CSP, followed by a debonding at 500 °C.     

Sintering,microwave properties,and circulator applications of textured Sc-substituted M-type ferrite thick films

Sc³⁺ substituted M-type ferrites are effective microwave magnetic materials with a ferromagnetic resonance frequency in the range of 20 GHz–50 GHz. We report on the fabrication of oriented ferrite thick films as microwave components for application in the K_a-band at 30 GHz. Films of BaFe_11.5.Sc_0.5O₁₉ were prepared by screen-printing on alumina substrates, drying in an external magnetic field, and sintering at 900 °C. Low-temperature sintering is achieved through use of a mixed BBSZ/CuO sintering aid. A strong anisotropy of the sintered ferrite films is revealed by XRD analysis. Microwave properties of the films were determined in a coplanar waveguide setup. The ferromagnetic resonance frequency of the films is at 30 GHz and the textured films possess good nonreciprocal properties which scale with film thickness. The films were tested in a Y-junction circulator, and represent promising materials for self-biased microwave components fabricated in thick film technology.     

Analyzing Dynamic Change in Social Network Based on Distribution-Free Multivariate Process Control Method

Social organizations can be represented by social network because it can mathematically quantify and represent complex interrelated organizational behavior. Exploring the change in dynamic social network is essential for the situation awareness of the corresponding social organization. Social network usually evolves gradually and slightly, which is hard to be noticed. The statistical process control techniques in industry field have been used to distinguish the statistically significant change of social network. But the original method is narrowed due to some limitation on measures. This paper presents a generic framework to address the change detection problem in dynamic social network and introduces a distribution-free multivariate control charts to supervise the changing of social network. Three groups of network parameters are integrated together in order to achieve a comprehensive view of the dynamic tendency. The proposed approaches handle the non-Gaussian data based on categorizing and ranking. Experiments indicate that nonparametric multivariate procedure is promising to be applied to social network analysis.     

Tuning effect of silicon substitution on magnetic and high frequency electromagnetic properties of R2Fe17 and their composites

In this work, we report the tuning effect of the Si substitution on the magnetic and high frequency electromagnetic properties of R₂Fe₁₇ compounds and their paraffin composites. It is found that the introduction of Si can remarkably improve the magnetic and electromagnetic properties of the R₂Fe₁₇ compounds, making the R₂Fe_17–xSi_x-paraffin composites excellent microwave absorption materials (MAMs). By introducing the Si element, their saturation magnetizations decrease slightly, while much higher Curie temperatures are obtained. Furthermore, better impedance match is reached due to the decrease of the high-frequency permittivity ε′ by about 40%–50%, which finally enhances the performance of the microwave absorption. The peak frequency (f_RL) of the reflection loss (RL) curve moves toward high frequency domain and the qualified bandwidth (QB, RL ≤ ?10 dB) increases remarkably. The maximum QB of 3.3 GHz (12.0–15.3 GHz) is obtained for the Sm_1.5Y_0.5Fe₁₅Si₂-paraffin composite (d = 1.0 mm) and the maximum RL of ?53.6 dB is achieved for Nd₂Fe₁₅Si₂-paraffin composite (d = 2.2 mm), both surpassing most of the reported MAMs. Additionally, a distinguished dielectric microwave absorption peak is observed, which further increases the QB in these composites.     

Controllable Image‐Based Transfer of Flow Phenomena

Modelling flow phenomena and their related weathering effects is often cumbersome due their dependence on the environment, materials and geometric properties of objects in the scene. Example‐based modelling provides many advantages for reproducing real textures, but little effort has been devoted to reproducing and transferring complex phenomena. In order to produce realistic flow effects, it is possible to take advantage of the widespread availability of flow images on the Internet, which can be used to gather key information about the flow. In this paper, we present a technique that allows the transfer of flow phenomena between photographs, adapting the flow to the target image and giving the user flexibility and control through specifically tailored parameters. This is done through two types of control curves: a fitted theoretical curve to control the mass of deposited material, and an extended colour map for properly adapting to the target appearance. In addition, our method filters and warps the input flow in order to account for the geometric details of the target surface. This leads to a fast and intuitive approach to easily transfer phenomena between images, providing a set of simple and intuitive parameters to control the process.     

A Study on Dual-Load-Zone Model of Overlying Strata and Evolution Law of Mining Stress

The changeable structure and movement law of overlying strata are the main contributor to the change of mining stress. Starting from the relevant theory of key stratum and particularly based on the theory of mine ground pressure and strata control, this research proposed a new solution to mining stress problems by establishing a dual-load-zone stratum structural model. Elastic foundation beam theory was used to solve the stress of overlying strata of the dual-load-zones with superposition method, which revised the traditional calculation method of mining stress. The abnormal increase of lead abutment pressure in the mining area was explained effectively, through which the evolution law of mining stress in the case of hard rock was obtained. The results indicate that mining stress experiences a drastic change within the range of 50 m ahead of the coal wall due to the collapse of main roof; under the influence of main key stratum and inferior key strata, the influence range of lead abutment pressure is extended up to approximately 120 m in the working face; this remarkable increase can be attributed to the excessive length of sagging zone. Results from both the dual-load-zone model experiment and field measurement demonstrate high consistency. The model can predict the influence range of abutment pressure effectively and thus guide the safety production of mining.     

Topological Characterization of Book Graph and Stacked Book Graph

Degree based topological indices are being widely used in computer-aided modeling, structural activity relations, and drug designing to predict the underlying topological properties of networks and graphs. In this work, we compute the certain important degree based topological indices like Randic index, sum connectivity index, ABC index, ABC₄ index, GA index and GA₅ index of Book graph B_n and Stacked book graph B_m,n. The results are analyzed by using edge partition, and the general formulas are derived for the above-mentioned families of graphs.